Publications
“CFD simulation of bubble columns using a VOF model”, in CFD 2010 - Proceedings, 2010.
, “Combined injection of plastic particles and heavy fuel oil into a blast furnace raceway - detailed CFD analysis”, in CFD 2010 - Proceedings, 2010.
, “Development of Agitation Systems in Biogas Plants : Investigation of Mixing Characteristics, Improvement of Energy Efficiency and Scale-up using CFD”, Chemical Engineering Transactions, vol. 21, pp. 1195–1200, 2010.
, “Improvement of a Combustion Unit Based on a Grate Furnace for Granular Dry Solid Biofuels Using CFD Methods”, Heat Transfer Engineering, vol. 31, pp. 774–781, 2010.
, “Investigation of the SO₂ Production Process by Combustion of Sulphur - Containing Substances Using CFD”, in Sulphur 2010 Technical Preprints, 2010.
, “Process-Simulation and Computational Fluid Dynamics for the Development of a Novel Solid Biomass-Fired Combustor”, Chemical Engineering Transactions, vol. 21, pp. 1093–1098, 2010.
, “CFD Simulation of Bubble Columns using the VOF Model : Comparison of commercial and Open Source Solvers with an Experiment”, Chemical Engineering Transactions, vol. 18, pp. 605–610, 2009.
, “CFD Simulation einer Blasensäule mit dem VOF Modell - Fluent vs. OpenFOAM vs. Experiment”, in Chemie Ingenieur Technik, 9, 2008.
, “Computational fluid dynamic simulation of a solid biomass combustor: modelling approaches”, Clean Technologies and Environmental Policy, vol. 10, pp. 165–174, 2008.
, “Influence of Vortex-Finder Diameter on Axial Gas Flow in Simple Cyclone”, Chemical Product and Process Modeling, vol. 3, 2008.
, “CFD methods for the reduction of reactive gas emission from a paper laminating machine”, Journal of Hazardous Materials, vol. 144, pp. 687–691, 2007.
, “Evaluation of the High Temperature Conversion of Plastic Particles after Injection into Blast Furnace Raceway Using CFD Simulations”, in Prc.of AIChE Annual Meeting, 2007.
, “Process simulation and CFD calculations for the development of an innovative baled biomass-fired combustion chamber”, Applied Thermal Engineering, vol. 27, pp. 1138–1143, 2007.
, “CFD simulation of a solid biomass combustor: modelling approaches for the reduction of emissions and maximisation of the thermal efficiency”, in Summaries 4 - System Engineering, 2006.
, “CFD-modelling for the combustion of solid baled biomass”, in Fifth International Conference on CFD in the Process Industries CSIRO, 2006.
, “Control of emission of reactive gas from a paper laminating machine by use of CFD”, in Chemical Industry and Environment V (5th European meeting on Chemical Industry and Environment), Horn, Austria, 2006.
, “Emissionsreduktion von Reaktivgas aus einer Laminiermaschine mit Hilfe von CFD”, in GVC/Dechema-Jahrestagungen 2006, 78/9, 2006.
, “NOx formation in natural gas combustion - a new simplified reaction scheme for CFD calculations”, Fuel, vol. 85, pp. 513–523, 2006.
, “Optimierung einer innovativen Verbrennungsanlage für ballenförmige Biomassen mittels Prozesssimulation und CFD”, in GVC/DECHEMA-Jahrestagungen 2006, 78/9, 2006.
, “Processing and simulation of few nm thick high-k dielectric films”, Microelectronic Engineering, vol. 83, pp. 1571–1572, 2006.
, “Behandlung von turbulenten Drall-Freistrahlen mit CFD”, in Chemie Ingenieur Technik, 8, 2005.
, “Modellierung turbulenter Freistrahlen mit numerischer Strömungssimulation (CFD)”, in Chemie Ingenieur Technik, 8, 2005.
, “NOx Formation in Natural Gas Combustion-Evaluation of Simplified Reaction Schemes for CFD Calculations”, Industrial {&} Engineering Chemistry Research, vol. 44, pp. 6622–6633, 2005.
, “Numerische Simulation der Ranque-Hilsch-Vortextube”, in Chemie Ingenieur Technik, 8, 2005.
, “Predicting the pressure drop of cyclones by combined application of computational fluid dynamics and chemometric methods”, in Conferentia Chemometrica 2005, Chemometrics VII, 2005.
,